Series #HSB
Heavy Duty - Slider Bed - Belt Conveyor
|
|
Pricing - Series #HSB
|
|
Pricing - 14" Belt Width / 20" Bed Width
|
Pricing - 30" Wide Belt / 36" Wide Frame
|
|
Pricing - 18" Wide Belt / 24" Wide Frame
|
Pricing - Options
|
|
Pricing - 24" Wide Belt / 30" Wide Frame
|
|
|
|
|
Specifications - Series #HSB
|
Belt: Black PVC 120 belt.
Bed: 12 gauge powder painted formed steel, 6-1/2" deep. Bed sections are 5' and 10' long bolted together with splice plates and floor supports.
Tail Pulley: 4" diameter crowned with 1-3/16" shaft.
Drive Pully: 8" diameter drive pulley with 1-7/16" shaft for bed lengths, all drive pulleys crowned and lagged.
Snub Rollers: 2-1/2" diameter directly behind drive pulley, 2" diameter at tail pulley.
Return Rollers: 1.9" diameter adjustable on 10' centers.
|
Floor Supports: Adjustable from 31" to 45", measured from floor to top of belt. Each conveyor supplied with one support at each end and one support at each bed joint.
Take-Up: 6" long screws located at tail pulley for belt tightening.
Bearings: Sealed and prelubricated with cast iron housing.
Motor: 1/2 HP 230-460-3-60 totally enclosed.
Belt Speed: 60 feet per minute, constant speed.
Finish: Green Powder Coat Finish.
|
|
Load Capacity Chart (60 FPM)
|
|
Maximum load per lineal foot of conveyor is 100-lbs. Not to exceed load capacity chart.
|
|
Motor HP
|
Maximum Total Load
|
|
1/2 HP Motor
|
435-lbs
|
|
3/4 HP Motor
|
650-lbs
|
|
1 HP Motor
|
810-lbs
|
