Driving Belt: V-Belt.
Bed: 7" x 1-1/2" x 12 gauge powder painted formed steel channel.
Tread Rollers: 2-1/2" diameter to 1-11/16" diameter x 14 gauge plated tapered rollers.
Pressure Sheaves: 3" diameter x 3/8" bore, adjustable to give required driving force.
Floor Supports: Adjustable from 31-1/2" to 45-1/2", measured from floor to top of roller. Each metal roller conveyor supplied with one support at each end and one center leg for outside frame.
|
Tangent: 12" long, one on each end.
Take-Up: Screw take-up provided to ensure proper V-Belt tension. Mounted underneath conveyor.
Bearings: Sealed and prelubricated with cast iron housing.
Motor: 1/2 HP 230-460-3-60 totally enclosed.
Belt Speed: 60 feet per minute, constant speed.
Finish: Green Powder Coat Finish.
|
