Series #MSB
Medium Duty - Slider Bed
Belt Conveyor
|
Design Basics
How To Design
Series MSB Belt Conveyor
|
|
Pricing - Series #MSB
|
|
Pricing - 8" Belt Width / 12" Bed Width
|
Pricing - 24" Belt Width / 28" Bed Width
|
|
Pricing - 12" Belt Width / 16" Bed Width
|
Pricing - 30" Belt Width / 34" Bed Width
|
|
Pricing - 18" Belt Width / 22" Bed Width
|
Pricing - Options
|
|
Pricing - 20" Belt Width / 24" Bed Width
|
|
|
|
|
Specifications - Series #MSB
|
Belt: Black PVC 120 belt.
Bed: 12 gauge powder painted formed steel, 4" deep. Bed sections are 5' and 10' long bolted together with splice plates and floor supports.
Tail Pulley: 4" diameter crowned with 1-3/16" shaft.
Drive Pully: 4" diameter drive pulley with 1-3/16" shaft for bed lengths 5' to 50', 8" diameter drive pulley with 1-7/16" shaft for bed lengths 55' to 100', all drive pulleys crowned and lagged.
Snub Rollers: 2" diameter for 4" drive pulley, 2-1/2" diameter for 8" drive pulley.
Return Rollers: 1.9" diameter adjustable on 10' centers.
|
Floor Supports: Adjustable from 28.5" to 42.5", measured from floor to top of belt. Each conveyor supplied with one support at each end and one support at each bed joint.
Take-Up: 6" long screws located at tail pulley for belt tightening.
Bearings: Sealed and prelubricated with cast iron housing.
Motor: 1/2 HP 230-460-3-60 totally enclosed.
Belt Speed: 60 feet per minute, constant speed.
Finish: Green Powder Coat Finish.
|
|
Series #MSB - Load Capacity Chart (60 FPM)
|
|
Maximum load per lineal foot of conveyor is 75-lbs. Not to exceed load capacity chart.
|
|
Motor HP
|
Maximum Total Load
|
|
1/2 HP Motor
|
435-lbs
|
|
3/4 HP Motor
|
650-lbs
|
|
1 HP Motor
|
810-lbs
|
